Let me try to clarify a few misconceptions. Why are you using VOX for keying ion the rig?īTW the TenTec Jupiter is supported for CAT control by WSJT-X using Hamlib, a CAT interface lead would be a very useful addition to your setup. The TenTec Jupiter does has a PTT input on that 5-pin accessory #1 socket that the SignaLink USB should be able to key if configured correctly. If you need to get your old Jupiter on FT8, this should get you started.Hi Gary, Also if the power level is greater than 25% the heat sink on the Jupiter will get very warm. Be sure to adjust the microphone level so that the red ALC light does not come on during transmit. In the Audio section select the CODEC options for both Input and Output. Do NOT select Jupiter from the rig drop down menu as this will not work. There is no need to test PTT or CAT at the bottom of the Radio section. In the WSJT-X software in the Radio section you set the rig = None. To make this work you set the microphone to “line” in the Jupiter menu. If you are buying it for the first time it comes with the SLCAB5PD cable to plug into the 5 pin accessory #1 socket on the back of the Jupiter. I just recently bought a SignaLink USB interface for the Ten Tec Jupiter.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |